Most common
problems & fixes

Is your AEG ÖKO_FAVORIT 50800 letting you down? Don't worry, we're here to help. Check out our list of the most common problems and how to fix them yourself.

The dishes are still dirty.

The wrong wash programme was selected, or the dishes were loaded in such a way that the wash water did not reach all items. The racks for the dishes may be overloaded. The filter in the base of the washing compartment can be dirty or incorrectly positioned. Detergent was not used or too little was used.

Select the correct wash programme, ensure dishes are loaded correctly, check and clean the filter, and use the appropriate amount of detergent.

Scale deposits on the dishes.

The special salt container is empty or the water softener is incorrectly adjusted.

Refill the special salt container and adjust the water softener correctly.

Error messages are displayed.

Various technical issues such as blocked siphon or incorrectly laid water drain hose.

Clean the siphon, check hose installation, and consult customer service if the issue persists.

Water is not running into the dishwasher.

Tap is blocked or furred with lime-scale.

Clean the tap to ensure proper water flow.

Quick setup

Follow these easy steps to get your AEG ÖKO_FAVORIT 50800 Dishwasher up and running in no time.

1

Adjust the Water Softener

To avoid scale deposits on the dishes and in the dishwasher, adjust the water softener. This ensures dishes are washed with soft, low-lime content water.

2

Filling with Special Salt

Open the door and remove the lower rack. Undo the lid on the salt container by turning it anticlockwise. For the first use, fill the salt container with water. Place the funnel supplied on the container opening and fill it with special salt. The capacity is approximately 1.0-1.5 kg depending on grain size.

3

Filling with Rinse Aid

Open the rinse aid dispenser by pressing the release button. Fill with rinse aid until the level indicator becomes dark. Be careful not to overfill. Set the dose level, close the lid, and press until it locks. Wipe up any spilled rinse aid with a cloth.

Eco-Friendly Genius

The AEG ÖKO_FAVORIT 50800 is a dishwasher with a green heart! It automatically adjusts water and energy usage based on the load size, making it both economical and environmentally friendly. Wash your dishes with a clear conscience!

Pulse Wash Power

This dishwasher is equipped with a 'PULSE WASH' system! It changes the motor speed and spray pressure during the wash cycle to give your dishes an extra sparkle—like a mini disco party for your plates!

Troubleshooting

The AEG ÖKO_FAVORIT 50800 Dishwasher has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your AEG might be giving you.

Fault Code (2) Displayed

The fault code (2) is shown on the multi-display or the ^ indicator is illuminated. This generally indicates a minor fault that can often be rectified by the user. After addressing the issue, press the button for the wash program that was started. The wash program will then continue.

Fault Code (3) Displayed

The fault code (3) indicates that the leak prevention system has been triggered. Close the tap immediately and contact customer service for further assistance.

^ Indicator Illuminated

The ^ indicator illuminates when there is no water running into the dishwasher, which might be due to a blocked tap or lime-scale buildup. Check the tap for blockages or lime-scale buildup and clean if necessary. Ensure the tap is fully opened.

Safety Instructions

The AEG ÖKO_FAVORIT 50800 dishwasher must be transported upright and installed on a firm, level floor. Ensure the water softener is correctly adjusted to avoid scale deposits. Do not sit or stand on the open door to prevent tipping over.

Operating Instructions

Select a wash programme based on the soil level of the dishes. Do not exceed recommended amounts of detergent, salt, or rinse aid. Ensure the spray arms can rotate freely when loading dishes, and use the correct detergent dosage for optimal cleaning results.

Installation and Connection

The dishwasher should be installed with the correct plumbing and electrical connections. Ensure that hoses and cables are not kinked or crushed. If installed next to a heat source, a heat-insulating plate must be used.

Technical Features

The dishwasher employs a 'PULSE WASH' system, varying motor speed and spray pressure for improved cleaning. The control panel includes an ON/OFF switch and program buttons with LED indicators. Adjust the water softener and refill with special salt and rinse aid as needed.

Economical and Ecological Dishwashing

Connect the dishwasher to the hot water supply only if it is not electrically heated. Avoid pre-rinsing dishes under running water. The load sensor optimizes water usage based on the load size, offering more economical washing by running full loads.

Care and Cleaning

Do not use aggressive cleaners or furniture care products. Keep filters clean and correctly positioned to ensure proper functioning. After a wash cycle, leave dishes to cool and dry for 15 minutes before unloading.

Error Messages and Troubleshooting

If dishes remain dirty, check program selection, loading configuration, and ensure filters are clean. Increase rinse aid if water spots are present on dishes. Consult the 'What to do if...' section for resolving common issues.

Maintenance

Check out our tips to prevent many common issues and extend the life of your AEG Dishwasher.

Regular Cleaning of the Filter

Ensure the filter in the base of the washing compartment is clean and correctly positioned. Regular cleaning prevents blockages and ensures efficient operation.

Loading Dishes Properly

Avoid overloading the racks to ensure water can reach all items. Proper loading helps achieve satisfactory wash results.

Correct Use of Detergent

Use the recommended amount of detergent. Avoid using too little or no detergent to ensure proper cleaning.

Checking the Special Salt Container

Regularly check and refill the special salt container to prevent scale deposits on dishes. Ensure the water softener is correctly adjusted.

Regular Maintenance of Rinse Aid

Ensure the rinse aid container is full. Proper rinse aid levels prevent streaks and spots on dishes.

)

tech specs

Need more info? Please have a look at the tech specs of the watch. We’ve used Latest technology & quality materials

General Specifications

Performance

Features

Installation

AEG ÖKO_FAVORIT 50800 Dishwasher: Efficiency Meets Innovation

The AEG ÖKO_FAVORIT 50800 dishwasher is a testament to modern efficiency combined with innovative design, making it an ideal choice for those seeking both performance and sustainability. This dishwasher is equipped with the advanced 'PULSE WASH' system, which intelligently varies motor speed and spray pressure to ensure optimal cleaning results, even for the most stubborn stains. With its environmentally conscious features, the ÖKO_FAVORIT 50800 not only minimizes water and energy consumption but also incorporates a load sensor to automatically adjust the wash cycle according to the size of the load, ensuring an economical operation with every use. This model accommodates up to 12 place settings, making it perfect for households of all sizes. Its sleek control panel, featuring intuitive LED indicators, allows for easy operation, while the robust build guarantees durability. Choose the AEG ÖKO_FAVORIT 50800 for a reliable, eco-friendly dishwashing solution that doesn't compromise on cleanliness or convenience.